Shopping cart

Your shopping cart is empty.

Satellite Signal Finder - Digital Meter & Tone

>
SKU:
SF-Digital

New digital satellite signal finder, makes it even easier to point and tune your dish to the optimal signal position.

Features:

  • LCD display to show the satellite signal intensity
  • LCD backlight / buzzer and attenuation control function
  • Built-in signal buzzer
  • Compass
  • Backlit blue to allow use at night
  • Easy operation, attenuation, audio tone and backlight
  • Automatically recognizes the LNBF frequency
  • Works with any C band, KU band, or KA band satellite
  • No need to input transponder frequency, symbol rate, or polarity
  • DC pass to LNB
  • Signal meter never needs to be recalibrated nor does it need complicated programming
  • Powered by the receiver, nice tool for campers
  • Perfect for use with high powered satellites

Specifications: 

  • Frequency Range : 950 to 2150MHz
  • Input Level Max: -10dB
  • Input Level Min: -40dB
  • Input voltage: 13-18vDC
  • Operation Range: LNB Gain = 52-60dB

How to Use

  1. Switch the satellite receiver on, the digital SATFINDER will turn on by itself.
  2. Set your dish to the proper azimuth and elevation settings. (The information should be supplied with your satellite dish).
  3. Adjust the knob until the signal strength display is at 0% (the critical point).
  4. Peak the signal by slowly moving the azimuth and elevation of your dish. The higher values, the better signal. If the digital SATFINDER’s reading becomes full scale, you can adjust the “?�????ATT” to reduce the incoming signal to a lower level. Continue to move the dish until you have the highest possible meter reading and the highest possible buzzer pitch.
  5. Remove the jumper cable and digital SATFINDER, and reconnect the LNB/ LNBF to your receiver.


New digital satellite signal finder, makes it even easier to point and tune your dish to the optimal signal position.

Features:

  • LCD display to show the satellite signal intensity
  • LCD backlight / buzzer and attenuation control function
  • Built-in signal buzzer
  • Compass
  • Backlit blue to allow use at night
  • Easy operation, attenuation, audio tone and backlight
  • Automatically recognizes the LNBF frequency
  • Works with any C band, KU band, or KA band satellite
  • No need to input transponder frequency, symbol rate, or polarity
  • DC pass to LNB
  • Signal meter never needs to be recalibrated nor does it need complicated programming
  • Powered by the receiver, nice tool for campers
  • Perfect for use with high powered satellites

Specifications: 

  • Frequency Range : 950 to 2150MHz
  • Input Level Max: -10dB
  • Input Level Min: -40dB
  • Input voltage: 13-18vDC
  • Operation Range: LNB Gain = 52-60dB

How to Use

  1. Switch the satellite receiver on, the digital SATFINDER will turn on by itself.
  2. Set your dish to the proper azimuth and elevation settings. (The information should be supplied with your satellite dish).
  3. Adjust the knob until the signal strength display is at 0% (the critical point).
  4. Peak the signal by slowly moving the azimuth and elevation of your dish. The higher values, the better signal. If the digital SATFINDER’s reading becomes full scale, you can adjust the “?�????ATT” to reduce the incoming signal to a lower level. Continue to move the dish until you have the highest possible meter reading and the highest possible buzzer pitch.
  5. Remove the jumper cable and digital SATFINDER, and reconnect the LNB/ LNBF to your receiver.


Log in or register to post review